[home][back to index]

How to install

Unzip the downloaded file into a folder of your choice, open the SpacetoadMIDI folder and run the 'SpacetoadMIDI.exe' program contained in it. As a next step open the AUDIO|Audio Out Settings menu option and select the sound card you wish to use. Then specify your external MIDI devices via the MIDI|MIDI Out Settings menu option. Since the "A" port is considered as the standard output, it is advisable to choose this port for the MIDI device you are likely to use most. If you have an external MIDI keyboard attached to your PC, choose its device name from the list in MIDI|MIDI In Settings as well. You will notice two displays with some yellow text inside on the top at the right side of the main window. These are MIDI monitors you can use to check if your MIDI equipment is properly connected. The left display will always show the last MIDI in message that was received, the other one shows the last message that was send by the sequencer to the outer world.

How to setup the VST engine will be described under the topic "How to setup the VST engine".

[home][back to index]


Counter
Privacy Policy